Whether your shutters are in use on the front of a retail shop or inside a factory, they play an essential role in keeping your property safe. If they’re not working properly or stop functioning altogether, it can be very frustrating. Fortunately, there are several things you can do to fix the problem and get them working again.
First, check that the power source is switched on. This is something many people forget to do and can cause problems when the roller shutters don’t open or close. It’s also a good idea to check that the batteries are charged and the sensors are clean.
If you find that your roller shutter shop shutter repair near me is stuck halfway open, it may be because the slats are damaged or uneven. In this case, you should replace the slats with new ones. You’ll probably need to unscrew the clips that hold them and then carefully remove the old slats. Be careful not to damage the motor or the tracks while doing this. If you aren’t comfortable doing this yourself, it’s best to contact a professional to help you.
Sometimes, the problem is simply that your shutter’s track has become dirty or obstructed. In this case, you can try cleaning the tracks with a cloth or a brush. If this doesn’t solve the problem, you can try lubricating them. You can buy a special spray lubricant that is designed for shutters, or you can use WD-40. Be sure not to spray it directly on the shutter though, as this could damage it.
It’s also possible that your shutter is stuck because the chain is damaged or worn down. This is another issue that can be resolved by replacing the chain with a new one. However, be careful to purchase a chain that is made for your shutter model. You can usually find replacement chains at your local hardware store or online.
It’s important to remember that you should never try to force a shutter that is stuck open or closed. This can cause further damage to the shutter and also be very dangerous. If your roller shutter is stuck, it’s always a good idea to call a professional for assistance. They’ll be able to identify the problem and fix it quickly.